Motorcraft 2bbl Carb Guide
Contents. Variations Unlike the Autolite 2100, the Motorcraft 2150 was available only in two venturi sizes. Both were available in manual and automatic transmission configurations.
1.08 venturi, 287 CFM These 2150s were used on Ford engines up to the in cubic displacement. Ford engines commonly equipped with the 1.08 venturi 2150:. 1975–1986.
1982–1983. 1973–1983 Note: The 250-I6 is derived from the Falcon line (144-170-200). Versions were only available with an integral cast head and intake making them only able to accept a one-barrel carb.
Foreign versions were also made with typical two-piece intake and head. 1973–1983 351W 5.8L light truck/van The last Ford vehicles to leave the factory with 2150 carburetors were 1986 Aerostars equipped with the 2.8 L V6. 1.21 venturi, 351 CFM These larger 2150s were generally used in large Ford passenger cars and trucks equipped with -series engines. Ford engines commonly equipped with the 1.21 venturi 2150:. 1973-1982. 1977-1982.
Ford 2bbl Carburetor For Sale
1977-1979 See also. References.
4: Component list for the Motorcraft 2150 carburetor The Model 2100 and 2150 2-barrel carburetors have an air horn assembly that covers the main body and houses the choke plate and the internal fuel bowl vents. The throttle plate, accelerator pump assembly, power valve assembly, and fuel bowl are contained in the main body. The automatic choke is also attached to the main body. Each bore contains a main and booster venturi, a main fuel discharge, an accelerating pump discharge, an idle fuel discharge, and a throttle plate. They are used on V8 engines. ADJUSTMENT - Float Level DRY The dry float level measurement is a preliminary check and must be followed by a wet float level measurement with the carburetor mounted on the engine. 14: Location of the fast idle screw-Motorcraft 2100 carburetor The accelerator pump operating rod must be positioned in the proper holes of the accelerator pump lever and the throttle overtravel lever to assure contact pump travel.
Motorcraft 2 Bbl Carburetor Identification
If adjusting is required, additional holes are provided in the throttle overtravel lever. Fast Idle Adjust the fast idle setting with the engine at operating temperature. The fast idle screw should be resting against the second step of the fast idle cam.
Adjust by turning the fast idle screw.